www.flightsim4fun.com - rksoftware

Hello Matthias, I cannot answer all your questions but give you some ideas regarding the displays: I have similar monitor configuration with 9 screens, but chose a different way with one PC and 2 graphics cards instead of a network solution. That is much more simple and I’m not sure if FS2020 or FS2...

Thank you for feedback and great to hear that script mod works just as well for you.

New Year's greetings to Greece

Happy New Year to you all. @ XAID104: My script mod works fine on my sim and I heard from another user who has used same modification that he is happy as well Please don't get me wrong, but I can neither read minds, nor do I know what your script contains or whether you have followed all the steps c...

o.k. that’ s simple. I think you are using script version 7.0 For left wiper replace existing left wiper section (Var 2715 and Var 0074) by lines as listed below: Wiper_L.jpg use your inputs 76 ... 79 instead of 32 ... 35 (my numbering) and for right wiper replace existing right wiper section (Var 2...

Hi, for correct wiper operation you would need a script modification that I can give you and that I have posted here previously. But before script mod can work, you need to verify wiper switch wiring and possibly have to change them. Please check if only one contact of each wiper rotary switch is wi...

Hi, Var 1819 was not used in the original scrip, for this reason I have specified it in the line between Var 0172 and Var 1536 cabin climb mod1.jpg Please don't forget to add the two minus signs At the end of Var 1536 I have put this (green box): cabin climb mod2.jpg I have used >500 feet for condit...

Update: - cabin climb gauge installed - script modified acc. to Roar's proposal - made 2 complete flights inc. pushback, taxiing and landing - cabin climb gauge works perfectly fine in the air and in any situation on ground (no jittery gauge behavior on ground!) if someone is interested in the corre...

Roar, thanks for input and proposal for script mod. This should work. I agree it must be a PMDG bug, because I can see these Var 1536 severe value fluctuations on IOCPConsole, although I haven't installed a cabin climb gauge and although I have disabled that section in script. Usually PMDG should su...

Roar; thx for offering support. I made a short flight and can report Var 1536 values as listed below: 1) on the ground, waiting at gate, engines started, everything in runway configuration: Var 1536 in IOCPConsole = 0 virtual cabin climb gauge: needle at 0 vsi_gate.jpg 2) on the ground, pushback: Va...

Ian, thx for input. Reading the OC servo card manual you can see that they recommend "closing any unused intputs with a jumper, to reduce fluctuations" (not OUTPUTS!). That's what I have already done. (blue jumpers on the potentiometer inputs J3 - J6) servo.jpg Actually I have connected 3 ...